Embedded Files
These links are provided as valuable resources for our members. ICC Region V does not endorse the organizations, products, or services found here. Please note that these resources are non-enforceable unless adopted by an authority having jurisdiction.
Standard Development Organizations
Standard Development Organizations
Aluminum Association
American Architectural Manufacturers Association
American Association of State Highway and Transportation Officials
Applied Building Technology Group LLC
Air Conditioning Contractors of America
American Concrete Institute
Architectural Fabric Structures Institute
American Institute of Steel
Air-Conditioning, Heating, & Refrigeration Institute
American Iron and Steel Institute
Automotive Lift Institute, Inc.
Air Movement and Control Association International
American National Standards Institute
APA - Engineered Wood Association
American Petroleum Institute
American Society of Agricultural and Biological Engineers
American Society of Civil Engineers / Structural Engineering Institute
ASHRAE
American Society of Mechanical Engineers
American Society of Plumbing Engineers
ASSE International
American Society of Safety Professionals
ASTM International
Association of the Wall and Ceiling Industry
American Wood Protection Association
American Wood Council
American Welding Society
American Water Works Association
Builders Hardware Manufacturers’ Association
State of California Department of Consumer Affairs
European Committee for Standardization (CEN)
Compressed Gas Association
Coast Guard Regulations
Cast Iron Soil Pipe Institute
Composite Panel Association
Consumer Product Safety Commission
Cool Roof Rating Council
Canadian Standards Association
Cedar Shake & Shingle Bureau
Consumer Technology Association Technology & Standards Department
Door & Access Systems Manufacturers Association International
Decorative Hardwoods Association
U.S. Department of Commerce
US Department of Energy
U.S. Department of Labor
U.S. Department of Transportation
U.S. Department of Treasury
European Committee for Standardization
Federal Communications Commission
U.S. Food and Drug Administration
Federal Emergency Management Agency
Fenestration & Glazing Industry Alliance
FM Approvals
Federal Specifications
Gypsum Association
Home Ventilating Institute
IAPMO Group
International Code Council, Inc.
IEC Regional Centre for North America
Institute of Electrical and Electronic Engineers, Inc.
International Institute of Ammonia Refrigeration
International Kitchen Exhaust Cleaning Association
International Safety Equipment Association
International Organization for Standardization
Material Handling Institute
Manufacturers Standardization Society of the Valve and Fittings Industry
Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.
National Association of Architectural Metal Manufacturers
North American Insulation Manufacturers Association
National Board of Boiler and Pressure Vessel Inspectors
National Concrete Masonry Association
National Electrical Manufacturers Association
National Fire Protection Association
National Fenestration Rating Council, Inc
National Ground Water Association
NSF International
OpenADR Alliance
Portland Cement Association
Precast Prestressed Concrete Institute
Plumbing and Drainage Institute
Pool & Hot Tub Alliance
Post-Tensioning Institute
Portable Sanitation Association International
Residential Energy Services Network, Inc.
Rack Manufacturers Institute
Structural Building Components Association
Steel Deck Institute
Steel Joist Institute
Sheet Metal & Air Conditioning Contractors’ National Assoc. Inc.
Single-Ply Roofing Industry
Solar Rating & Certification Corporation
Telecommunications Industry Association
The Masonry Society
Truss Plate Institute
UL LLC
Underwriters Laboratories of Canada
United States Code
United States Federal Trade Commission
West Coast Lumber Inspection Bureau
Window and Door Manufacturers Association
World Millwork Alliance
Wire Reinforcement Institute, Inc.
State Specific Industry Links
State Specific Industry Links
Ohio
Ohio
Industry Trade Associations List - The list of Ohio recognized Accreditation Bodies created in accordance with the provisions of section 114 of the Ohio Building Code (OBC) and the Residential Code of Ohio (RCO).
"When test reports are required to be submitted or when the rules of the board specify that materials, products, assemblies and methods of construction are to conform to specific referenced standards, the building official is to verify that the proposed material, product, assembly, and method of construction have been tested by a testing laboratory recognized by the board and published on the list titled “Recognized Conformity Assessment Bodies” found on the board’s website at https://com.ohio.gov/divisions-and-programs/industrial-compliance/boards/board-of-building-standards.
The building official is to verify that the testing laboratory is accredited to perform the specific tests prescribed in the code by verifying the testing laboratory’s “scope of accreditation” found on the testing laboratory’s website." - Except OBC Section 114.3.1.1
The intent of this list is to identify those bodies that accredit conformity assessment bodies such as testing labs, product certification bodies (evaluation services and listing agencies), inspection agencies, field evaluation bodies, fabricator inspection agencies, and special inspection agencies, calibration laboratories for materials or assemblies, and Industry Trade Association Certification Programs.
The accreditation bodies listed are recognized by the Board of Building Standards in accordance with Ohio Administrative Rule 4101:7-6-01, Criteria for Board Recognition of Accreditation Bodies, Conformity Assessment Bodies, And Industry Trade Association Certification Programs.
Accredited bodies are subject to a triannual renewal where the next expiration deadline is set for July 1, 2026.
Conformity Assessment Bodies List - These recognitions are used by certified building officials for verification of the accreditation status of conformity assessment bodies where the Ohio Building Code (OBC) and Residential Code of Ohio (RCO) require testing, inspection, labeling or grademarking of materials or assemblies, and where those reports from such bodies are reviewed and approved by the building official on a project-by-project basis for building code compliance as required by the Ohio Board of Building Standards. The accreditation is in accordance with Ohio Administrative Rule 4101:7-6-01, Criteria for Board Recognition of Accreditation Bodies, Conformity Assessment Bodies, and Industry Trade Association Certification Programs.
Statement of Special Inspections - In accordance with Section 1704.2.3 of the Ohio Building Code the applicant shall submit a statement of special inspections in accordance with Section 107.1 as a condition for approval issuance. The State of Ohio provides a template that contains the required elements that are required to be provided in accordance with Section 1704.3. Applicants should attach the resumes of the inspectors declared in Part II of the statement.
Page updated
Google Sites
Report abuse